dvbv5-zap(1)

NAME
dvbv5-zap - DVBv5 tool for service tuning

SYNOPSIS
dvbv5-zap [OPTION]... channel-name

dvbv5-zap [OPTION]... frequency-name (for monitor or all PIDs mode)

DESCRIPTION
dvbv5-zap is a command line tuning tool for digital TV services that is compliant with version 5 of the DVB API, and backward compatible with the older v3 DVB API.

dvbv5-zap uses by default a new channel/service file format that it is capable of supporting all types of Digital TV standards. It can also support the legacy format used by the legacy dvb-apps.

The dvbv5-zap tool can be used on several different modes, depending on the parameters used.

Please note that, in order to be able to use it in record mode, where both the audio and video Packet IDs (PIDs) are output to a dvr record node, the input file should contain the PIDs, e. g. they should have been produced by a digital TV zap application like dvbv5-zap.

OPTIONS

-c, --channels= channel-name-file
    Read channels list from 'file'. Defaults to ~/.tzap/channels.conf.

-3, --dvbv3
    Force dvbv5-zap to use DVBv3 only. Useful to test if the legacy API support is working.

-a, --adapter=adapter#
    Use the given adapter. Default value: 0.

-A, --audio_pid=audio_pid#
    Select a different audio Packet ID (PID). The default is to use the first audio PID found at the channel-name-file.

-C, --cc=country_code
    Set the default country to be used by the MPEG-TS parsers, in ISO 3166-1 two letter code. If not specified, the default charset is guessed from the locale environment variables.

-d, --demux=demux#
    Use the given demux. Default value: 0.

-f, --frontend=frontend#
    Use the given frontend. Default value: 0.

-I, --input-format=format
    Format of the input file. Please notice that caps is ignored. It can be:

    channel         - for dvb-apps compatible channel file;

    zap - for dvb-apps compatible zap file;

    dvbv5 (default) - for the dvbv5 apps format.

-l, --lnbf=LNBf_type
    Type of LNBf to use 'help' lists the available ones.

-L, --search=string
    Search/look for a string inside the traffic. Used only on monitor mode.

-m, --monitor
    Enable monitor mode. On this mode, it will monitor de DVB traffic for all Packet IDs (PIDs) received by the device, showing the Packet IDs (optionally filtered by a string), and presenting some traffic statistics: number of packets per second, number of Kbytes per second and total traffic. Those statistics are shown per PID and the total per MPEG-TS.

-o, --output=file
    Output filename. If specified, it will output the content of the MPEG-TS into the file with the first video PID and the first audio PID (or the one specified by audio_pid#). Use -o - for directing the output to stdout.

-p, --pat
    Add PAT and PMT MPEG-TS tables to TS recording (implies -r).

-P, --all-pids
    Don't filter any pids. Instead, outputs all of them.

-r, --record
    Sets up the /dev/dvb/adapteradapter#/dvr0 for MPEG-TS record.

-s, --silence
    Increases silence (can be used more than once).

-S, --sat_number=satellite_number
    Satellite number. Used only on satellite delivery systems. If not specified, disable DISEqC satellite switch.

-t, --timeout=seconds
    Amount of seconds to keep the tool running for zapping and for recording. Useful if you want to record a program that you know its duration.

-U, --freq_bpf=frequency
    SCR/Unicable band-pass filter frequency to use, in kHz. Used only on satellite delivery systems.

-v, --verbose
    Be verbose. Useful to check if the MPEG-TS is happenning fine. This option can be used multiple times to increase verbosity.

-V, --video_pid=video_pid#
    video pid program to use (default 0)

-w, --lna=LNA
    Enable, disable or put LNA power in auto mode. Not all frontends support it. Valid values are:

    0 - disable

    1 - enable

    -1 - auto

-W, --wait=time
    Adds additional wait time for DISEqC command completion.

-x, --exit
    Exit after tuning.

-X, --low_traffic
    Also shows DVB traffic with less then 1 packet per second. Used only in monitor mode.

-?, --help
    Outputs the usage help.

--usage
    Gives a short usage message.

--version
    Prints program version.

EXIT STATUS
On success, it returns 0.

EXAMPLES

  Recording a channel

The typical use is to tune into a channel and put it into record mode:

$ dvbv5-zap -c dvb_channel.conf 'music' -r
using demux '/dev/dvb/adapter0/demux0'
reading channels from file 'dvb_channel.conf'
service has pid type 05: 204
tuning to 573000000 Hz
audio pid 104
dvb_set_pesfilter 104
Lock (0x1f) Quality= Good Signal= 100.00% C/N= -13.80dB UCB= 70 postBER= 3.14x10^-3 PER= 0
DVR interface '/dev/dvb/adapter0/dvr0' can now be opened

The channel can be watched by playing the contents of the DVR interface, with some player that recognizes the MPEG-TS format.

For example, this audio-only channel can be playew with mplayer:

$ mplayer -cache 800 /dev/dvb/adapter0/dvr0
MPlayer SVN-r37077-4.8.2 (C) 2000-2014 MPlayer Team
TS file format detected.
NO VIDEO! AUDIO MPA(pid=104) NO SUBS (yet)!  PROGRAM N. 0
==================================================================
Opening audio decoder: [mpg123] MPEG 1.0/2.0/2.5 layers I, II, III
AUDIO: 48000 Hz, 2 ch, s16le, 192.0 kbit/12.50% (ratio: 24000->192000)
Selected audio codec: [mpg123] afm: mpg123 (MPEG 1.0/2.0/2.5 layers I, II, III)
==================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...

  Monitoring a channel

The dvbv5-zap tool can also be used to monitor a DVB channel:

$ dvbv5-zap -c dvb_channel.conf 573000000 -m
using demux '/dev/dvb/adapter0/demux0'
reading channels from file 'dvb_channel.conf'
service has pid type 05:  204
tuning to 573000000 Hz
Lock   (0x1f) Quality= Good Signal= 100.00% C/N= -13.90dB UCB= 384 postBER= 96.8x10^-6 PER= 0
  dvb_set_pesfilter to 0x2000
PID     FREQ    SPEED   TOTAL
0000    9.88 p/s        14.5 Kbps       1 KB
0001    1.98 p/s        2.9 Kbps        376 B
0010    18.77 p/s       27.6 Kbps       3 KB
0011    48.42 p/s       71.1 Kbps       8 KB
0012    1455.53 p/s     2137.8 Kbps     270 KB
…
1fff    1033.60 p/s     1518.1 Kbps     192 KB
TOT     25296.44 p/s    37154.2 Kbps    4700 KB
Lock   (0x1f) Quality= Good Signal= 100.00% C/N= -13.90dB UCB= 384 postBER= 96.8x10^-6 PER= 0

BUGS
Report bugs to Linux Media Mailing List <linux-media@vger.kernel.org>

COPYRIGHT
Copyright (c) 2011-2014 by Mauro Carvalho Chehab.

License GPLv2: GNU GPL version 2 <http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.